mechanical discs to hydraolic



mtnrider

New Member
Feb 13, 2005
44
0
0
I found some amazing deals on hyrolic brakes, the only problem is that they don't have an "adaptor" or at least thats what the add said. A mechanic at my local shop said that my mechanical brake (a shimano) adaptor would work if I hooked the two up. Is this true? I need an answer fast. are there any other faq sites you would recomend:confused:
 

Conniebiker

New Member
Jan 1, 2005
347
2
0
38
I cant say for sure without knowing what type of Hydraulic units you are referring to.
I have Shimano Deore 525 Hydro and they needed the Manitou- I.S. mount adapter. There is only one type of adapter for 6 inch to my knowledge. The adapter will take the 51mm International Standard(the ones with the holes sideways) and give a bolt face for the 74mm Manitou caliper mount(vertical holes). There is no adapter needed when going the other way, however an I.S. caliper cannot go on a Manitou fork.


For an 8 inch rotor you would need an extension adapter.
 

Similar threads