Mounting Rack/Fender on Single Eyelet

[[email protected]]

Hi,

I am attempting to modify a CX bike for light touring, and need to
mount a rear rack. There is a single set of eyelets in the rear. Is
it possible to mount the rack and fenders using the same set of
eyelets? Do most rack manufacturers include bolts long enough to do
this? Are there disadvantages to this approach? Will both be
secure? I realize several models made by Tubus and BG have fender
mounting locations built-in to the rack which would solve the dilemna
described above, but I was thinking about trying an Old Man Mountain
rack. I like the idea of attaching the rack to the cantilever bosses,
because my bike does not have seatstay bosses.

Thanks.
Brad

 

[Brian Huntley]

Brad wrote:

> Is it possible to mount the rack and fenders using the same set of
> eyelets? Do most rack manufacturers include bolts long enough to do
> this? Are there disadvantages to this approach? Will both be
> secure?

Yes, no, yes, yes.

Go get some stainless hardware about 4-5 mm longer that what came with
the rack, depending on the thickness of the fender stays. Be sure to
mount the rack closest to the bike frame, with the fender stays
outboard of that.

 

[Mike Beauchamp]

It shouldnt' be a problem at all..
Here's what I'd do.. put the rack mounts closest to the frame, then the
fender mounts. if you know what I mean. Like, put the rack first, then the
fender then the bolts. The reason being that if you load that rack up with
tons of ****, the bolt would be way less likely to shear or bend or
whatever.

Mike



<[email protected]> wrote in message
news:[email protected]...
> Hi,
>
> I am attempting to modify a CX bike for light touring, and need to
> mount a rear rack. There is a single set of eyelets in the rear. Is
> it possible to mount the rack and fenders using the same set of
> eyelets? Do most rack manufacturers include bolts long enough to do
> this? Are there disadvantages to this approach? Will both be
> secure? I realize several models made by Tubus and BG have fender
> mounting locations built-in to the rack which would solve the dilemna
> described above, but I was thinking about trying an Old Man Mountain
> rack. I like the idea of attaching the rack to the cantilever bosses,
> because my bike does not have seatstay bosses.
>
> Thanks.
> Brad
>

 

[Frank Krygowski]

[email protected] wrote:

> Hi,
>
> I am attempting to modify a CX bike for light touring, and need to
> mount a rear rack. There is a single set of eyelets in the rear. Is
> it possible to mount the rack and fenders using the same set of
> eyelets?

Been there, done that. It worked.


Do most rack manufacturers include bolts long enough to do
> this?

Probably not. Mine didn't.

Are there disadvantages to this approach?

Possibly. I like being able to remove the fenders quickly, for
"sportier" rides in good weather. If you mount both items in the most
obvious way, the fenders are a pain to remove.

Here's a possible fix for that: Start with a long stainless steel screw
of the proper size. Start the screw from the _inside_ of the dropout,
and run it all the way down so the threads stick _out_ as far as they can.

Now install your rack over the outward-facing screws. Run the nuts down
to hold it in place. You should still have plenty of thread protruding
out beyond the rack.

Next, mount your fenders on those outward facing screws. Use a second
nut to hold the fenders down. (Some people use a wingnut for that, but
I've never trusted them.)

If you want the fenders off quickly, you don't have to disturb the nuts
that keep the rack in place.


Will both be
> secure?

Yes.

I realize several models made by Tubus and BG have fender
> mounting locations built-in to the rack which would solve the dilemna
> described above, but I was thinking about trying an Old Man Mountain
> rack. I like the idea of attaching the rack to the cantilever bosses,
> because my bike does not have seatstay bosses.

Hardware store P-clips are the standard solution at that end, if
necessary.



--
--------------------+
Frank Krygowski [To reply, remove rodent and vegetable dot com,
replace with cc.ysu dot edu]