Mounting the Polar Sensor on the Carbonaero fork

Discussion in 'Triathlon' started by Barbara Larrain, Jun 16, 2003.

  1. I am trying to get the Polar speed sensor to keep from moving over & hitting the spoke magnet on my
    Carbonaero fork which due to hits shape provide more than the ususal challenge.

    I have it picking up a signal just fine from the drops & have moved the jumper to hopefully increase
    the signal while on aero bars. I have mounted it on the right fork facing toward the rear of the
    bike with the Polar logo facing the inside. The data correlates quite well with my Speedzone
    wireless cyclocomputer & wired cadence. But my wireless pickup just died & I repleaced am trying to
    get it reset so that both work with 1 set of zip ties & 1 magnet with the speedzone sensor one way &
    the Polar the other. I did have it that way & it worked but one or the other would end up moving
    over & hitting the spoke magnet after a while.

    Wondering if anyone has any thoughts or hints on mounting it on this fork.


    Barbara L