"George Stuteville" <
[email protected]> wrote in message
news:[email protected]...
> Hi,
>
> I want to install a 7-speed freewheel to an old strong 5-speed rim. Would I be able to use it on
> my road bike where I currently have a 7 speed freehub and RSX set-up?
>
> I know...the answer is set it up and see, but I am hoping someone here can save me the labor and
> the mistake if it isn't possible.
>
> thanks,
I think you want to screw a 7 speed freewheel onto an older 5 speed wheel, right? Measure the
distance from the seat of the freewheel thread on your current seven speed wheel and duplicate that
spacing on your five speed wheel, re-center the rim over the locknuts and you're set! A look at the
left side might lead you to add spacing there as well to keep the spoke tension relatively even left
to right. If you do then you're almost certainly up for a new axle but those are cheap and
plentiful.
If you measure carefully and buy another seven speed freewheel you'll be able to use either of your
wheels in this bike.
We used to do a lot of this work, synchronizing wheels, when freewheel setup varied widely from bike
to bike. With modern cassette systems we just adhere to Campagnolo's standard and every wheel shifts
in every bike.
--
Andrew Muzi
http://www.yellowjersey.org Open every day since 1 April 1971