Can anyone tell if the hubs in wheels for "paired spokes" such as
Rolfs are drilled with the spoke holes on each flange aligned with
those on the other flange, or are they offset by 1/2 hole spacin as on
normal hubs?
TIA
DR
Cycling Equipment · Public discussion
Paired Spoke Hub Drilling
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 8 June 2004
- Last activity
- 8 June 2004
- Original author
- DirtRoadie
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 310
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
(DirtRoadie) said:
Can anyone tell if the hubs in wheels for "paired spokes" such as
Rolfs are drilled with the spoke holes on each flange aligned with
those on the other flange, or are they offset by 1/2 hole spacin as on
normal hubs?
TIADR
Most Rolf rear hubs are offset, but only by about 6 degrees. That's
just enough to let the left spokes line up about an inch ahead of the
right spokes (at the rim).Normal hubs are offset much more than this. For normal hubs,
Offset = 360 / N, where N is the number of spokes.The Rolf front hubs I've worked on (and Vector Pro rear hubs) are not
offset at all. -
In Message-id: <[email hidden]>
dianne_1234 [email hidden] wrote
Message-id: <[email hidden]>Quoted message said:
The Rolf front hubs I've worked on (and Vector Pro rear hubs) are not
offset at all.That's what I wanted to know
Thanks.DR
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.