To PaulMD or others who have had, and cured, the 300PT drifting problem:
This is from old threads about an upward drift of the torque/power on a 300PT that was assumed to be caused by the flywheel gettting hot and heating up the hub.
When you recieved the new flywheel/hub and the problem was cured, did the flywheel quit getting hot?
TF
Note: Also posted on the Google Wattage forum.
This is from old threads about an upward drift of the torque/power on a 300PT that was assumed to be caused by the flywheel gettting hot and heating up the hub.
When you recieved the new flywheel/hub and the problem was cured, did the flywheel quit getting hot?
TF
Note: Also posted on the Google Wattage forum.