PaulMD (or others)- 300PT cure...

[Terry Ferguson]

To PaulMD or others who have had, and cured, the 300PT drifting problem:

This is from old threads about an upward drift of the torque/power on a 300PT that was assumed to be caused by the flywheel gettting hot and heating up the hub.

When you recieved the new flywheel/hub and the problem was cured, did the flywheel quit getting hot?

TF

Note: Also posted on the Google Wattage forum.

 

[tahoebiker]

I posted this on wattage also, but I just paid to replace my wired flywheel with the new wireless flywheel because of this issue and the torque will still not zero. CycleOps is sending me out a new hub to try, should have it tomorrow to test over the weekend. Let you know.

Jeff

 

[Terry Ferguson]

I posted this on wattage also, but I just paid to replace my wired flywheel with the new wireless flywheel because of this issue and the torque will still not zero. CycleOps is sending me out a new hub to try, should have it tomorrow to test over the weekend. Let you know.

Jeff

The hub in the flywheel is field replaceable? - TF

 

[tahoebiker]

Yes. Just bolts in. We will see.