Cycling Equipment · Public discussion

polar s520 question

Started by lupson · · Last activity · 5 posts · 618 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
18 September 2004
Last activity
20 September 2004
Original author
lupson
Posts
5
Discussion status
Public discussion
Total views
618
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. does anyone know how to replace the cadence sensor battery?

  2. lupson said:

    does anyone know how to replace the cadence sensor battery?

    Open it up very carefully. I.e. be very careful making sure that you have a
    very small Philips screwdriver that will not damage your screws. There are
    two of them and once you get the feeling for it just unscrew them and open
    it up. Pull out the circuit board where you will see the battery. One of the
    fasteners can be lifted up with a small screwdriver so that you can slide
    the battery out.

    When closing I sometimes put a wee bit of white grease around the rubber
    seal. Be careful not to over tighten the small screws.

    Speed sensor is done the same way.

    --
    Perre

    You have to be smarter than a robot to reply.

  3. Quoted message said:

    Open it up very carefully. I.e. be very careful making sure that you have a
    very small Philips screwdriver that will not damage your screws. There are
    two of them and once you get the feeling for it just unscrew them and open
    it up. Pull out the circuit board where you will see the battery. One of the
    fasteners can be lifted up with a small screwdriver so that you can slide
    the battery out.

    When closing I sometimes put a wee bit of white grease around the rubber
    seal. Be careful not to over tighten the small screws.

    Speed sensor is done the same way.

    Just to add, the two screws are located in the part you can't reach when the sensor is mounted. So you'll have to remove the sensor
    first to reach the screws.

    "Per Elmsäter" <[email hidden]> wrote in message news:[email hidden]...

    Quoted message said:
    lupson said:

    does anyone know how to replace the cadence sensor battery?

    Open it up very carefully. I.e. be very careful making sure that you have a
    very small Philips screwdriver that will not damage your screws. There are
    two of them and once you get the feeling for it just unscrew them and open
    it up. Pull out the circuit board where you will see the battery. One of the
    fasteners can be lifted up with a small screwdriver so that you can slide
    the battery out.

    When closing I sometimes put a wee bit of white grease around the rubber
    seal. Be careful not to over tighten the small screws.

    Speed sensor is done the same way.

    --
    Perre

    You have to be smarter than a robot to reply.

  4. how long do the batteries usually last?

  5. lupson said:

    how long do the batteries usually last?

    Between a year or two for me. I ride 5000+ miles and around the year through
    Scandinavian winter. Warmer weather will give longer battery life.

    --
    Perre

    You have to be smarter than a robot to reply.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.