Cycling Equipment · Public discussion

presta valve removers

Started by saturnsc2 · · Last activity · 4 posts · 1,800 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
10 August 2005
Last activity
10 August 2005
Original author
saturnsc2
Posts
4
Discussion status
Public discussion
Total views
1,800
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. can presta valves be removed like schrader valves? i have a tool to tighten my schrader valves with my road bikes's on the road repair tools in case they loosten & leak air, & i would like to get such a tool for my other bike that has presta valves.

  2. Some Presta valves have removable cores, you can tell by the flat sides near the end of the valve. but mostly they don't. Generally the only tightening they need is screwing down the small threaded bit on the stem. Also Presta valves are held closed by the air pressure inside so they don't leak anyway.

  3. eric_the_red said:

    Some Presta valves have removable cores, you can tell by the flat sides near the end of the valve. but mostly they don't. Generally the only tightening they need is screwing down the small threaded bit on the stem. Also Presta valves are held closed by the air pressure inside so they don't leak anyway.

    are presta valves able to withstand more air pressure than schrader valves?

  4. saturnsc2 said:

    are presta valves able to withstand more air pressure than schrader valves?


    No, they really don't handle higher pressure than Schrader valves... but at least they are easier to fill due to not having a spring inside like Schrader valves. Air pressure holds them shut/open. It is best to "burp" them by "unscrewing the retaining knurled nut and unseating the stem" before inflating. Otherwise your pump will need to overcome the resistance of the internally seated valve before any air will enter the tube.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.