Cycling Equipment · Public discussion

pump valve stuck

Started by beerismygas · · Last activity · 5 posts · 258 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
4 August 2007
Last activity
6 August 2007
Original author
beerismygas
Posts
5
Discussion status
Public discussion
Total views
258
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. hi there,

    when inflating using my foot pump, the pump sometimes resists movement
    & the gauge reaches 80psi. something appears to be getting stuck. any
    idea what it could be?

    i know i can buy another pump for $4 from Herbor Fright, but this was
    a quality pump & i would like to try to dismantle and clean it if
    possible.

    thx

  2. beerismygas said:

    hi there,

    when inflating using my foot pump, the pump sometimes resists movement
    & the gauge reaches 80psi. something appears to be getting stuck. any
    idea what it could be?

    Kinda sounds to me like it's the valve in your tube that's getting stuck -
    sounds to me like there's nothing wrong with your pump.

  3. beerismygas said:

    hi there,

    when inflating using my foot pump, the pump sometimes resists movement
    & the gauge reaches 80psi. something appears to be getting stuck. any
    idea what it could be?

    Common situation, if you have presta valves. The valve gets stuck. I
    loosen the nut, then tap the end with the pump head to unstick the valve
    (so little air comes out). Then it will work fine.

    --

    David L. Johnson

    What is objectionable, and what is dangerous about extremists is not
    that they are extreme, but that they are intolerant.
    --Robert F. Kennedy


  4. Quoted message said:

    Kinda sounds to me like it's the valve in your tube that's getting stuck -
    sounds to me like there's nothing wrong with your pump.

    didnt think of that. thx

  5. pumps need maintenance. take apart at regular intervals, clean,
    regrease with silicone grease so aso not to rot the rubbah.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.