Recumbent bicycles · Public discussion

Quetzal Misterio

Started by Tim Wright · · Last activity · 3 posts · 1,382 views

Thread details

What we know about this thread

Original section
Recumbent bicycles
Published
17 February 2006
Last activity
20 February 2006
Original author
Tim Wright
Posts
3
Discussion status
Public discussion
Total views
1,382
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. Hi, I recently purchased a second-hand ow-milage Quetzal Misterio.

    More recently, it broke - the forks at the back (between the rear
    suspension and the wheel) have actually bent to the side meaning that my
    rear wheel no longer points in the same direction as the bike.

    I was wondering if this is a common problem with this model bike, and if
    so, what's the best way to stop it happenning agaon (and to fix the forks?)

    Has anyone had a similar problem or heard stories (I'm worried it might
    be a design defect).

    I sensibly bought the bike from a good bike dealer so they've got it
    back for repairs (aah, warrenties🙂 but I was wondering if there was
    something I could tell them to ensure it doesn't happen again.

    Tim

  2. Tim Wright said:

    Hi, I recently purchased a second-hand ow-milage Quetzal Misterio.

    More recently, it broke - the forks at the back (between the rear
    suspension and the wheel) have actually bent to the side meaning that my
    rear wheel no longer points in the same direction as the bike.

    Pictures? Is this the same bike currently sold as the Quetzal SR:
    <http://www.mikadobicycles.ca/en/randonnee_bikes.asp?id=6>?

    Were the fork blades warped or did the bend occur at the pivot with the
    main tube?

    Quoted message said:

    I was wondering if this is a common problem with this model bike, and if
    so, what's the best way to stop it happenning agaon (and to fix the forks?)

    Did any unusual event occur; e.g. rear wheel stuck in storm sewer
    grate, or did the damage happen during regular riding?

    Quoted message said:

    Has anyone had a similar problem or heard stories (I'm worried it might
    be a design defect).

    If the damage occurred during regular riding, you are either too heavy
    for the bike, the frame lacks an adequate factor of safety against
    plastic deformation, or there was a manufacturing defect; e.g. change
    in materials, material section or improper heat treatment.

    Quoted message said:

    I sensibly bought the bike from a good bike dealer so they've got it
    back for repairs (aah, warrenties🙂 but I was wondering if there was
    something I could tell them to ensure it doesn't happen again.

    Not enough information has been presented to form an opinion.

    --
    Tom Sherman

  3. That looks like exactly the one.

    The fork blades were warped - the pivot with the main tube is fine.

    regular riding - I'd stopped at some lights and when I rode off the
    chain came off and I noticed that the back wheel was pointing in a
    different direction.

    The bike shop assured me I'm not to heavy for the bike - I weigh about
    100KG.

    I rang the bike shop today and they are busy straightning and re-welding
    the back forks. I guess they are planning to put extra strengthning in
    there but will check it when I pick it up.

    At the moment, I'm assuming that it was a mistake made when building the
    thing.

    Tim

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.