Cycling Equipment · Public discussion

Re: Campy hub grease leak?

Started by Qui si parla Campagnolo · · Last activity · 1 post · 476 views

← Back to Cycling Equipment

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
6 May 2005
Last activity
6 May 2005
Original author
Qui si parla Campagnolo
Posts
1
Discussion status
Public discussion
Total views
476
Views / 30 days
0
Topics
Campagnolo

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–1 of 1
Posts remain in their original chronological order.

Text size
  1. Original post
    Qui si parla Campagnolo
    Archived post
    #1
    Mike Owens said:

    I repacked a modern Chorus 9-speed hub using Phil Wood Grease. The


    bearings

    Quoted message said:

    and gaskets seemed to go back into place properly. After adjusting


    the

    Quoted message said:

    lockring, there is no play. After each of the past two 100 km rides,


    there

    Quoted message said:

    is considerable grease on the outside of the hub where the adjusting


    ring

    Quoted message said:

    is. Still no play so I think it is still properly adjusted. Is this


    just

    Quoted message said:

    the lower viscosity, excess Phil grease running out past the gasket


    or is

    Quoted message said:

    the gasket not in there properly or something else?
    -Mike

    Probably just grease ooozzzz. No problem, you really can't put too much
    grease into a hub.

    Report

Keep exploring

Browse the sectionCycling Equipment Return to CyclingForumsStart at the home page Search discussionsFind another thread

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.