Re: Old TA crank - which puller needed ?

I said:

Quoted message said:

They use a TA puller, 23 mm.

We've got 'em:

http://sheldonbrown.com/harris/french.html#tools

Sheldon: Maybe I went too "old" on that one. I notice that the
Item Description says "This is a unique size, only for the
Cyclotouriste and Tevano models". What about the 3 arm alloy
TA's popular in the 70's ?

All of the older models used that 23 mm size. It'll be obvious if you
try to fit a 22 mm puller in, 'onacountta the threads won't grab even a
little bit.

I've updated that page.

What is confusing is that newer designs from TA, such as the Zephyr and
Alize and the newer Carmina have adopted the 22 mm standard, but the
older models, such as your Professionnel and the Tevano, as well as the
Cyclotouriste (which appears to still be in production) use the older
23 mm tool.

By the way, don't curse TA for being non-standard...I think they were first!

Sheldon "Cyclotouriste" Brown
+-------------------------------------------------------+
| ...what is hailed as a new style or a new school |
| in literature often consists of doing as a novelty |
| what a Victorian did long ago as a joke. |
| -- G.K. Chesterton |
+-------------------------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

Retro Bob said:

Sheldon Brown said:

They use a TA puller, 23 mm.

We've got 'em:

http://sheldonbrown.com/harris/french.html#tools

Sheldon: Maybe I went too "old" on that one. I notice that the
Item Description says "This is a unique size, only for the
Cyclotouriste and Tevano models". What about the 3 arm alloy
TA's popular in the 70's ?

Same tool, 23mm

--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971