Re: Raleigh Twenty Bottom Bracket Shell



J

jtaylor

Guest
"Lars Lehtonen" <[email protected]> wrote in message
news:[email protected]...

> I reckon some
> penetrating oil will get me past the right-side cup hurdle.
>


If that isn't enough, get a large grade 5 bolt that will just fit through
the axle hole, and a nut to match. Put the bolt through from the inside,
screw the nut down tight on the outside, then crank on the nut. The tighter
the net gets the more grip it will have on the cup (I'm assuming it has LH
threads - if not, a buffing wheel mandrel for use in hand-held drills has
left-hand threads and is about the correct size).