rec.sport.unicycling · Public discussion

Re: SS 14g 36er Spokes breaking

Started by adelman · · Last activity · 2 posts · 577 views

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
21 June 2008
Last activity
26 June 2008
Original author
adelman
Posts
2
Discussion status
Public discussion
Total views
577
Views / 30 days
4

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–2 of 2
Posts remain in their original chronological order.

Text size
  1. rob.northcott said:

    One of the nipple heads sheared off after less than 20 miles, but I
    think that was just a bad nipple as I've had no problems since I
    replaced it.

    Rob

    Or it could be too short a spoke length. The spokes need to be long
    enough to thread up through the body of the nipple (the thin part) and
    up into the head (thick part) or else the nipples will fail at the
    junction between the head and body.

    Pull the tire and rim tape and look at a few. Ideally, the spokes
    should come up through the nipple and stop flush with the bottom of the
    screwdriver slot in the head of the nipple. A millimeter or so either
    way of that shouldn't be a problem.

    Ken

    --
    adelman
    ------------------------------------------------------------------------
    adelman's Profile: http://www.unicyclist.com/profile/9329
    View this thread: http://www.unicyclist.com/thread/70758

    Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
    http://www.usenet.com

  2. Make sure they use brass washers on the elbow end. I had a coker wheel
    build without them, and broke a lot of spokes.

    corbin

    --
    corbin

    http://www.corbinstreehouse.com
    ------------------------------------------------------------------------
    corbin's Profile: http://www.unicyclist.com/profile/7561
    View this thread: http://www.unicyclist.com/thread/70758

    Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
    http://www.usenet.com

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.