Rear Derailer Pully Wheels



Status
Not open for further replies.
K

Killerbee

Guest
Looked at local shop (Everett, Wa) and wnat 15 a jockey wheel! Anyone know of a place (local or
online) where I can get some.

Thanks
 
"killerbee" <[email protected]> wrote in message news:[email protected]...
> Looked at local shop (Everett, Wa) and wnat 15 a jockey wheel! Anyone know of a place (local or
> online) where I can get some.
>
> Thanks

What shop? I live in Everett, also. One shop I know of wants $130.00 for an Avid mech!!! $70 at
Pricepoint...

Let me guess, the shop is on Evergreen and has a poorly designed parking lot?

Was that $15 for each wheel? Most replacements I could find were about $15 for the pair. Could get
up around $22 if you want those colorful anodized aluminum types.

--
Cameron
 
Performance sells these, though I forgot how much...

--
- Zilla Cary, NC (Remove XSPAM)

"Cameron" <[email protected]> wrote in message
news:[email protected]...
>
> "killerbee" <[email protected]> wrote in message
news:[email protected]...
> > Looked at local shop (Everett, Wa) and wnat 15 a jockey wheel! Anyone
know
> > of a place (local or online) where I can get some.
> >
> > Thanks
>
> What shop? I live in Everett, also. One shop I know of wants $130.00 for
an Avid mech!!!
> $70 at Pricepoint...
>
> Let me guess, the shop is on Evergreen and has a poorly designed parking
lot?
>
> Was that $15 for each wheel? Most replacements I could find were about $15
for the pair.
> Could get up around $22 if you want those colorful anodized aluminum
types.
>
> --
> Cameron
 
Yes it was the one with the poorly designed parking lot. Just looking for shimano
replacements.....BC does have some pricing issues.

"Cameron" <[email protected]> wrote in message
news:[email protected]...
>
> "killerbee" <[email protected]> wrote in message
news:[email protected]...
> > Looked at local shop (Everett, Wa) and wnat 15 a jockey wheel! Anyone
know
> > of a place (local or online) where I can get some.
> >
> > Thanks
>
> What shop? I live in Everett, also. One shop I know of wants $130.00 for
an Avid mech!!!
> $70 at Pricepoint...
>
> Let me guess, the shop is on Evergreen and has a poorly designed parking
lot?
>
> Was that $15 for each wheel? Most replacements I could find were about $15
for the pair.
> Could get up around $22 if you want those colorful anodized aluminum
types.
>
> --
> Cameron
 
"killerbee" <[email protected]> wrote in message news:[email protected]...
> Yes it was the one with the poorly designed parking lot. Just looking for shimano
> replacements.....BC does have some pricing issues.

I guessed correctly... :)

Some pricing issues? Tip: never buy or even bother looking for components there. They're a ripoff
place. Unless you want a year end road bike.

If you haven't already ordered the pulley's online, and you haven't called them yet, try giving
Tim's Bike Shop (257-9037) a ring on Monday. The shop is right on Broadway, next to Alfy's. That's
my LBS. They have given me quite a few greate deals. Such as when I had a friends bike stored up
here. His chainrings were worn and trashed horribly. I picked up a new RaceFace Prodigy XC for $80,
installed. Recently, I replaced my LX chainrings (22-32) with matching TruVativ rings for $10 and
$20, respectively. Including installation. And as far as my 2003 JrT goes..... well, I don't want to
make you cry. :)

They may not have the jockey wheels in stock, but they should be able to order them, if you wish.
They also try to be competitive in pricing, but if they can't meet your desired spending price, they
won't get ****** off if you buy somewhere else. Unless you go back to 'BC'. They have issues with
that "bike shop". ;-)

--
Cameron

>
> "Cameron" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "killerbee" <[email protected]> wrote in message
> news:[email protected]...
> > > Looked at local shop (Everett, Wa) and wnat 15 a jockey wheel! Anyone
> know
> > > of a place (local or online) where I can get some.
> > >
> > > Thanks
> >
> > What shop? I live in Everett, also. One shop I know of wants $130.00 for
> an Avid mech!!!
> > $70 at Pricepoint...
> >
> > Let me guess, the shop is on Evergreen and has a poorly designed parking
> lot?
> >
> > Was that $15 for each wheel? Most replacements I could find were about $15
> for the pair.
> > Could get up around $22 if you want those colorful anodized aluminum
> types.
> >
> > --
> > Cameron
> >
> >
 
Status
Not open for further replies.