rebuilding mavic cosmic elite hubs

Discussion in 'Cycling Equipment' started by Jack Wallen, May 12, 2003.

Thread Status:
Not open for further replies.
  1. Jack Wallen

    Jack Wallen Guest

    can these hubs be rebuilt? i have a set and the rear hub doesn't rotate as freely as it should. i
    also have a spare front hub - can i use the bearings from it in the rear hub?

    a local shop said the entire hub would have to be replaced without even opening it up to check. i've
    rebuilt hubs before but wanted to check to see if anyone had any advice on this particular hub
    before i cracked it open.

    thanks much

    [email protected]
     
    Tags:


  2. Hello Jack, there is a "dealers only" part of the Mavic Website. The adress is: www.tech-mavic.com
    You find all kind of technical info there (in english) You log in "mavic-com" and the pass is
    "dealer" You'll find all the spare parts lists and so on Enjoy!

    jack wallen a écrit:
    > can these hubs be rebuilt? i have a set and the rear hub doesn't rotate as freely as it should. i
    > also have a spare front hub - can i use the bearings from it in the rear hub?
    >
    > a local shop said the entire hub would have to be replaced without even opening it up to check.
    > i've rebuilt hubs before but wanted to check to see if anyone had any advice on this particular
    > hub before i cracked it open.
    >
    > thanks much
    >
    > [email protected]
     
Loading...
Thread Status:
Not open for further replies.
Loading...