M
Michael Leger
Guest
2000 P-38, Medium frame with extended boom. Red
The bike is in very good condition, there are 2 small tears in the seat and the seat bag.
Approximately 3,000 miles total. It just had a full tune-up.
349 Front wheel, 700c rear
Components: Shimano 105 52/42/30 Triple Crank Shimano 105 Triple Front Derailleur SRAM 9.0 Brake
Levers SRAM 9.0 1/2 Pipe shifters SRAM 9.0 Rear Derailleur Shimano 11-34 Cassette Shimano HG90 Chain
Mirrcycle bar-end Mirror Odyssey A Brakes SUN 349 Rim 2 Schwalbe City Marathon 349 tires 1 Primo
Comet 349 tire, some wear SUN CR18 700c Rim XT hub Continental Sport 1000 700x28c tire Avocet
700x35c tire HostelShoppe seat bag Zefal HP frame pump
The handlebars are 'chopped'. They do not have the downturn of the stock bars. This enables them to
fit inside of the fairing better, and makes for a narrower fairing also.
The fairing is my first. It is yellow and black. I cut it off lengthwise at the seat, with the
intention of creating a tailfairing, that could be used independently. I would describe it as a
mediocre, but satisfactory fairing. The nose has a nice smooth curve. You will need to create or buy
mounting hardware, cut the door, and bombbay doors. There are several good sites with instructions
for doing so: http://www.recumbents.com/mars/pages/proj/projtetz.html &
http://www.wisil.recumbents.com/wisil/bubblemounting/bubblemounting.htm
I will include one full sheet of Yellow Plastazote LD45, .500", for you to create a tailfairing.
Price $2400, buyer pays shipping. Pictures on request.
Contact Mike via email at the address listed, or at h-608 273-9973, or w-608-527-3633
The bike is in very good condition, there are 2 small tears in the seat and the seat bag.
Approximately 3,000 miles total. It just had a full tune-up.
349 Front wheel, 700c rear
Components: Shimano 105 52/42/30 Triple Crank Shimano 105 Triple Front Derailleur SRAM 9.0 Brake
Levers SRAM 9.0 1/2 Pipe shifters SRAM 9.0 Rear Derailleur Shimano 11-34 Cassette Shimano HG90 Chain
Mirrcycle bar-end Mirror Odyssey A Brakes SUN 349 Rim 2 Schwalbe City Marathon 349 tires 1 Primo
Comet 349 tire, some wear SUN CR18 700c Rim XT hub Continental Sport 1000 700x28c tire Avocet
700x35c tire HostelShoppe seat bag Zefal HP frame pump
The handlebars are 'chopped'. They do not have the downturn of the stock bars. This enables them to
fit inside of the fairing better, and makes for a narrower fairing also.
The fairing is my first. It is yellow and black. I cut it off lengthwise at the seat, with the
intention of creating a tailfairing, that could be used independently. I would describe it as a
mediocre, but satisfactory fairing. The nose has a nice smooth curve. You will need to create or buy
mounting hardware, cut the door, and bombbay doors. There are several good sites with instructions
for doing so: http://www.recumbents.com/mars/pages/proj/projtetz.html &
http://www.wisil.recumbents.com/wisil/bubblemounting/bubblemounting.htm
I will include one full sheet of Yellow Plastazote LD45, .500", for you to create a tailfairing.
Price $2400, buyer pays shipping. Pictures on request.
Contact Mike via email at the address listed, or at h-608 273-9973, or w-608-527-3633