Hi, anybody give me some advice on how to remove a freehub (make unknown) looks like an allenkey/wrench fitting through the middle of the hub, 10mm allen is to small so I have to go and source a bigger one, when I get the correct size, which way do I turn it to undo it, looking from the disc rotor side.
Reason, just replaced the rear axle and bearings (bent and pitted) and the hub itself is now stiffer than it was, resulting in the chain going slack and dropping when slightly back pedaling, I presume I got to much grease in there somewhere and it needs cleaning out.
Thanks
Rob
Reason, just replaced the rear axle and bearings (bent and pitted) and the hub itself is now stiffer than it was, resulting in the chain going slack and dropping when slightly back pedaling, I presume I got to much grease in there somewhere and it needs cleaning out.
Thanks
Rob