Has anyone experimented with running tubeless Hutchinsons on a regular
rim using a cut innertube for the sealing rimstrip. I have had good
luck with this 'ghetto' setup on my mtn bike. Stan's has come out with
a valve and their tape technique for sealing a regular rim. I was just
wondering if anyone is tinkering around using a 24" or 26" tube as the
rimstrip? My biggest concern as it was on the mtn bike setup was if
the bead was going to seat well with a tube between the tire and the
rim. It works great w/ a mtn bike tire (non UST) at much lower
pressures. It seems like it should work OK w/ a road tire at 100psi.
TIA.
Andy
Cycling Equipment · Public discussion
Road Ghetto Tubeless
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 27 November 2007
- Last activity
- 27 November 2007
- Original author
- Andy
- Posts
- 1
- Discussion status
- Public discussion
- Total views
- 282
- Views / 30 days
- 2
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.