Seat modification ???

as far as I know reeder handles are only made for Miyata seats, which
have a different front bolt pattern than KH seats. Sorry, it won't fit
your seat. (As far as I know. Maybe they make 4 hole ones, but I don't
remember ever hearing about them.)

as for ambidextrousness: left or right does mean that you grab the
handle with left or right hand. They're not very ambidextrous at all,
which is why they're so nice.

--
Fuego - A Cult of Unicyclists

If u could've aborted president bush using medicinal marijuana grown by
a gay guy with a feeding-tube who was on death row, wade u?
-GILD

"Get off my Property before you sue me!"
-Morons everywhere.

'OneWheelNinjaSquad' (http://gallery.unicyclist.com/OneWheelNinjaSquad)
------------------------------------------------------------------------
Fuego's Profile: http://www.unicyclist.com/profile/6983
View this thread: http://www.unicyclist.com/thread/42617

1. yes, but drilling out the plastic will weaken it.
2. yes
3. I would use one, i'm not sure how well the plastic base would hold up
to the torque.
4. yes
5. no

reeder handles won't bolt directly to any seat. you have to drill the
bolt holes on the seat to connect it.

--
onetrack - street unicycling sucks

there are no good street riders

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil

Take only pictures, Leave only footprints.
------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/42617

[image: http://img.villagephotos.com/p/2005-7/1053301/P1010001.JPG]

You'll have to drill your own holes in the seat base.... and probably
the little metal plate that's in there too. Make sure you grind down
those two little plastic ridges that run long the bottom on the seat
base so the handle sits level.

These handles are great for one hand, and terrible for the other.

Dave

--
fcwegnm0b - HammerTron

"So the nurse was telling me about what you did to your ankle... and I
all got was 'unicycle', 'mountain', and 'filming'"
------------------------------------------------------------------------
fcwegnm0b's Profile: http://www.unicyclist.com/profile/8357
View this thread: http://www.unicyclist.com/thread/42617

I believe George Barnes was working on making some seat stiffeners for
the KH saddle that are similar to the stiffeners he made for the 'Miyata
saddle' (http://www.unicycle.com/shopping/shopexd.asp?id=607). The
Miyata saddle stiffener has holes at the front to fit the Miyata handle,
Reeder handle, and GB4 handle. All three handles have different bolt
patterns to mount them. I would suspect that the KH stiffener would
also have the same swiss cheese assortment of bolt holes for all the
different handles.

You're going to need some sort of additional stiffener support inside
the saddle to handle the additional forces on the saddle caused by the
handle and to keep the bolts from pulling through or spinning around.

--
john_childs - Guinness Mojo

john_childs (att) hotmail (dott) com
Gallery: '' (http://gallery.unicyclist.com/john_childs)
' Unicycling Bookmark List' (http://backcountry.unicyclist.com/) ::
'World Clock' (http://tinyurl.com/a99y3) >>>'Click Me'
(http://tinyurl.com/7lvbu)<<<
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/42617