shimano 10spd chain skip



I just installed a brand new drive train. It's 10sp shimano durace.
11-23 cassette w/wipperman hollowpin chain.

The chain skips at the same point in the pedal stroke when in the 11
cog. This goes for whether it's in the 53 or 39 ring. Every other
combination works fine and I couldn't find any binding links.

Any ideas?

-Andrew
Boulder, CO
 
I had a similar problem with my 9s setup. I found that the quick
connect link (whatever it's called) caused problems with the 11. I
eliminated it and had no further problems.
 
W

Wasatch5k

Guest
Flip the connex link over, it's taller on one side. Solved my problems.

n
 
Q

Qui si parla Campagnolo

Guest
[email protected] wrote:
> I just installed a brand new drive train. It's 10sp shimano durace.
> 11-23 cassette w/wipperman hollowpin chain.
>
> The chain skips at the same point in the pedal stroke when in the 11
> cog. This goes for whether it's in the 53 or 39 ring. Every other
> combination works fine and I couldn't find any binding links.
>
> Any ideas?
>
> -Andrew
> Boulder, CO


Wipperman snap link has a top and bottom. Look at it and ensure the
smooth part of the link is toward the cogs, otherwise it will skip on
the 11t.

If this makes no sense, come by the shop and I'll check it'

vecchio's
1833 Pearl ST