some more tips and tricks about cyling...



carlover

New Member
Jun 12, 2012
2
0
0
[SIZE=8.0pt]Make sure your bike fits. Handlebars, saddle, wheels, gears, and brakes can all be adjusted to match your size and riding ability, but the frame has to fit from the start. To find the right frame size, straddle the bike and stand flatfooted: on a road bike, there should be one to two inches of clearance between your groin and the top tube. On a mountain bike, the clearance should be two to three inches or even more.[/SIZE]
[SIZE=8.0pt] Position the saddle right to protect your knees. At the bottom of the stroke, your knee should be only slightly bent. If your knee is bent too much, the seat is too low, and you will lose stroking power and strain your knees. If the knee locks when extended, or if you have to reach for the pedal, the seat is too high, which can also stress the knee. The saddle should be level.[/SIZE]
[SIZE=8.0pt] Position the handlebars correctly—one inch lower than the top of the seat. Drop handlebars (preferable because they allow you to change your riding position) should be about as wide as your shoulders or slightly narrower. Some cyclists who suffer from neck or back discomfort may prefer upright handlebars.[/SIZE] thanks again....
 

Similar threads