"Jacobe Hazzard" <
[email protected]> wrote in message news:<
[email protected]>...
> dan_s wrote:
> > Hi all
> > i'm new to this group
> > i just bought a dynohub, to be installed in a 3 gear raleigh
> > i googled extensively but couldn't find the correct length of spokes
> > for lacing.
> > parts specs are:
> > GH6 front dynohub, 16 holes on the wide side, 8 (double?) holes on the
> > narrow
> > 26x1 3/8 or 590mm 36holes sturmey archer rim
> > i want to lace the standard way, is that 2 cross?
> > can anyone help with correct spoke length on each side and lacing
> > pattern? thanks
> > dan
>
.... you can take measurements of the hub and rim, and input them
> into any spoke calculator that can handle different-sized flanges. I do
> believe the standard lacing is 2 cross, I could check one of my wheels for
> you if are unable to find this out.
>
> Also, I believe that sturmey archer rim is steel? If you're taking the
> time to make a handbuilt wheel and haven't already got the spokes, you
> would do better with a sturdy double-wall aluminum rim, it will bulid a
> much lighter wheel that's just as strong or stronger.
As has been mentioned your hub is meant for use with 32 spokes, and if
your rim has 36 spokes it would be less than desirable to build them
up together into a wheel. One on line calculator does have the SA
dynohub dimensions in its database, see
http://www.geocities.com/d_halem/wheel/wheel.html
It doesn't have the ERD for an old Sturmey Archer Steel rim.
Typical lacing for the SA dynohub is 2 cross for the high flange and 3
cross for the low flange. You can go 1 cross or radial for the high
flange if you prefer, the steel flange is less likely to fail under
radial spoking than aluminum hubs.
Harris cyclery lists a 32 hole 590 alloy Sun rim which you could use,
and they could probably sell you appropriate length spokes as well.
The rim listing is at
http://sheldonbrown.com/harris/rims/590.html
This would make for a wheel that has some useful braking in wet
weather, and would work well with a nice relatively high pressure tire
like the Continental.
I do have some spare NOS 32 hole Dynohub equipped wheels with 590
Sturmey Archer steel rims, if you're in the US and want to buy one let
me know. Or I have NOS 32 hole Sturmey steel 590 rims and original
spokes that came out of a NOS wheel as well. It's probably not worth
the cost of shipping to anywhere else. I'd encourage you to consider
the aluminum rim from Harris though unless you plan to ride the bike
only in fair weather.
The Sturmey Archer Dynohub only produces about 1.8 Watts so a standard
3 Watt generator light will not work well. Reflectalite sells a
halogen bulb suited to the Dynohub, see
http://www.reflectalite.com/lightmodel.html#anchor439407
for a listing. They take Paypal and ship internationally so it's
convenient to order from them.
Best wishes with your Dynohub project,
Bill Putnam