D
Dukes909
Guest
So, in trying to true my wheel I ended up stripping the brass nipple.
Resorting to my "dumb brute" method, the only thing I can think to do is cut
the spoke and replace said spoke and nipple with new ones (I tried wrenching
it off with pliers w/o success).
Question 1: this is a wheen from circa 1992, 2 mm in width, seems to be SS.
Can I replace just one spoke, or should I replace them all at one time? The
other spokes are fine.
Question 2: if ordering new spokes, when I measure the existing spoke, do I
include the little bend where it attaches to the hub as part of the length?
Cheers!
Duke
Resorting to my "dumb brute" method, the only thing I can think to do is cut
the spoke and replace said spoke and nipple with new ones (I tried wrenching
it off with pliers w/o success).
Question 1: this is a wheen from circa 1992, 2 mm in width, seems to be SS.
Can I replace just one spoke, or should I replace them all at one time? The
other spokes are fine.
Question 2: if ordering new spokes, when I measure the existing spoke, do I
include the little bend where it attaches to the hub as part of the length?
Cheers!
Duke