spynergy wheels

[peteryan]

Can anyone help?

Where can I get spokes for Spynergy SR3 Wheels?

No one seems to have them. Does anyone know who the australian dealer/importer is?

The spoke are straight pull and they seem to be hard to get.

Any ideas?

Peter

 

[Sprinter_989]

Whats version wheels do you have? 1, 2 or 3
Version 1
FRONT
-Has face knurl on both endcaps
-Has the word, "SPINERGY," pad-printed on hubshell in white
REAR
-Has face knurl on both endcaps
-Has the word, "SPINERGY," pad-printed on hubshell in white
-Uses the Edco cassette body (Black seal ring and Black cassette body seal)

Version 2
FRONT
-Has face knurl on both endcaps
REAR
-Has face knurl on both endcaps
- Uses the Hadley cassette body (Silver/Gold seal ring and Blue cassette body seal)

Version 3
FRONT
-Endcaps thread into axle
-NO face knurl on endcaps
REAR
-NO face knurl on non-drive side axlecap
-Uses the Hadley cassette body (Silver/Gold seal ring and Blue cassette body seal)

 

[Sprinter_989]

If Version 1 go to:
http://www.spinergy.com/archive/sr3version1.htm
If Verision 2 go to:
http://www.spinergy.com/archive/sr3version2.htm
If Version 3 go to:
http://www.spinergy.com/archive/sr3version3.htm

On the left hand side it has a list of different parts.
Find what kind of spoke you want and get the part number, then go to http://www.spinergy.com/smallparts.html and fill out this form with part number.

 

[peteryan]

Hi

I think they are version 1.

The front and rear hubs have the word spynergy printed on them.

Regards

Peter ryan

Originally posted by Sprinter_989
Whats version wheels do you have? 1, 2 or 3
Version 1
FRONT
-Has face knurl on both endcaps
-Has the word, "SPINERGY," pad-printed on hubshell in white
REAR
-Has face knurl on both endcaps
-Has the word, "SPINERGY," pad-printed on hubshell in white
-Uses the Edco cassette body (Black seal ring and Black cassette body seal)

Version 2
FRONT
-Has face knurl on both endcaps
REAR
-Has face knurl on both endcaps
- Uses the Hadley cassette body (Silver/Gold seal ring and Blue cassette body seal)

Version 3
FRONT
-Endcaps thread into axle
-NO face knurl on endcaps
REAR
-NO face knurl on non-drive side axlecap
-Uses the Hadley cassette body (Silver/Gold seal ring and Blue cassette body seal)

 

[peteryan]

Thank you for your help

Regards

Peter ryan

Originally posted by Sprinter_989
If Version 1 go to:
http://www.spinergy.com/archive/sr3version1.htm
If Verision 2 go to:
http://www.spinergy.com/archive/sr3version2.htm
If Version 3 go to:
http://www.spinergy.com/archive/sr3version3.htm

On the left hand side it has a list of different parts.
Find what kind of spoke you want and get the part number, then go to http://www.spinergy.com/smallparts.html and fill out this form with part number.