Sram Rival Indexing. Wont Jump To The Smalest Cog

Discussion in 'Cycling Equipment' started by NOR viking, Mar 25, 2015.

  1. NOR viking

    NOR viking New Member

    Joined:
    Mar 25, 2015
    Messages:
    1
    Likes Received:
    0
    So i recently bought a sram rival package and just set it up. After initial tuning and indexing it wont jump into the smallest cog. Anybody had this problem before and eventually know a fix i would be super happy. What should i eventualy try and troubleshoot?
     
    Tags:


  2. lectraplayer

    lectraplayer Member

    Joined:
    May 11, 2014
    Messages:
    289
    Likes Received:
    6
    sounds like your cable tension and/or adjustment screws may be out of whack. I would double check that.
     
  3. dabac

    dabac Well-Known Member

    Joined:
    Sep 16, 2003
    Messages:
    2,272
    Likes Received:
    138
    Turn the barrel adjuster all the way in, check if the gear goes in or overshoots.
    If it doesn't, and the cable goes slack, you have a limit screw set wrong.
    If it doesn't, and the cable stays tight, most probably you didn't have the shifter in the right gear when you hooked the cable up.
    Unclamp cable, set first position by limit screw, make sure shifter have released all cable, clamp cable and tune again.
     
Loading...
Loading...