are these only for normal canties or can they be switched for v-brakes (like some other tektro
levers)? I asked tektro but they didn't reply.
Cycling Equipment · Public discussion
tektro rx 2.0 cyclocross brake levers
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 20 May 2003
- Last activity
- 22 May 2003
- Original author
- Gerrit Van Wijk
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 1,867
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"gerrit van wijk" <[email hidden]> wrote in message
news:<[email hidden]>...Quoted message said:
are these only for normal canties or can they be switched for v-brakes (like some other tektro
levers)? I asked tektro but they didn't reply.i think theyre just for cantis/normal sidepulls/etc. the paul levers have a choice between cable
pull for both types of brakes, but the tektros dont. i have both. the tektros are quite nice, but do
you need them for v-brakes?you could always use one of those adapters that fit at the brake. the tektros are far cheaper than
the paul, at least last time i checked, and buying the tektro lever set/brake adapter might be
cheaper than the pauls. could be wrong here. just a thoguht.or you could use cantis. solid.
-
"ant" <[email hidden]> schreef in bericht
"]news:[email hidden]...Quoted message said:
"gerrit van wijk" <[email hidden]> wrote in message
news:<[email hidden]>...Quoted message said:
Quoted message said:
are these only for normal canties or can they be switched for v-brakes
(likeQuoted message said:
Quoted message said:
some other tektro levers)? I asked tektro but they didn't reply.
i think theyre just for cantis/normal sidepulls/etc. the paul levers have a choice between cable
pull for both types of brakes, but the tektros dont. i have both.Thank you for clearing that up.
Quoted message said:
the tektros are quite nice, but do you need them for v-brakes?
Yes v-brakes.
Quoted message said:
you could always use one of those adapters that fit at the brake.
Don't these give a spongy feeling to the brakes? I think I'll experiment a little with normal cheap
mtb levers I have laying around. Saw the clamps of and replace it with wider clamps??Quoted message said:
the tektros are far cheaper than the paul, at least last time i checked,
Pauls (and others) are very nice but way to pricy for what is really a simple brake lever.
Quoted message said:
or you could use cantis. solid.
I like cantis, but I like v-brakes even better.
Thanks for your help.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.