CAMPYBOB said:
Quote by Alf:
"OH, YOU CAN'T READ!"
Actually, I can.
I can also use correct nomenclature and symbology.
But, go ahead and ignore ALL the many questions posed to you in this thread that you've dodged answering. Just like Froome's foot, you're broken, Alf. And you can't be fixed.
Harping on your idiotic milk jug washer?! The 'air gap' flexing Hirth Joint was far funnier, dipshit. Pure comedy gold.
YOU are the distraction in this thread, Alf. Every piece of incorrect and misleading information you posted is a distraction. The thread was beyond salvaging five pages ago. All we're doing now is poking fun at you and laughing at your every moronic response.
YUP!!
I must be a
wicked good craftsman with the tools that I have BECAUSE
I have been able to ensure that my threaded BB shells are as specified (
e.g., an English Threaded BB shell is 68.00mm ... not 68.05mm ... not 67.95mm ... et cetera) BUT
I can also install my Ultra Torque BB cups so that I don't need to use shims when installing an Ultra Torque crankset.
It's good that YOU apparently know YOUR limitations and have resorted to using shims.
UNANSWERED QUESTIONS ...
Really?
Snarky remarks are not questions.
Are the snarky remarks YOUR version of trolling for a response which you can then complain about?
When the answers which I've given don't fit inside your worldview, you mock them ...
How did you want me to reply to your remark about a "ball pein (sic)" hammer?
I suppose that YOU should be even MORE IMPRESSED if I was able to use a
ball peen hammer to bring my frame's BB shell into what
I deem to be the ideal dimension which somehow allows me to eliminate using the Wavy Washer without ponying up for a set of the Rogue Mechanic's shims.
The
douchebag & YOU are the ones who inexplicably fixated on a suggestion-in-passing which one might consider using ...
If it's truly a bad material choice, then it is ...
But, can the DIY silicon washer be that much better?
Maybe, maybe not.
I certainly wouldn't resort to something THAT half-assed on MY Colnago.
Does it REALLY bother you that I used SR cups with an alloy crank?
What do you propose I use?
Oh, I know an answer you can mock ...
I chose it because it was BLACK and not a DARK BRONZE color.
How's that?
Is it something which you can work with?
What else is there to say if YOU continue to insist that
144.5 == 145.5?
I've offered what
I feel is a useful alternative to using shims because shims are typically used to compensate for imprecision in manufacture IF a person has the ability to ensure that their BB shell is properly dimensioned ...
No one else has to use it ...
Again
, I must apparently be a
wicked good craftsman with the tools that I have ...
And again, It's good that YOU know YOUR apparent limitations.
BTW. I would suggest to you that the
douchebag has been has been using you the way the
globalwarming hoaxers have been using their useful idiots AND (
if you need another example) how the outside provocateurs have been using the urban protesters in Baltimore, Ferguson,
etc. to create distrust of their local police; but, for you to comprehend THAT you would have to pull-your-head-out-of-your-ass for a few minutes.