Cycling Equipment · Public discussion

Ultegra Short reach STI?

Started by Scott Gates · · Last activity · 4 posts · 1,289 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
20 July 2003
Last activity
20 July 2003
Original author
Scott Gates
Posts
4
Discussion status
Public discussion
Total views
1,289
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Does Shimano still make Ultegra short reach STI Levers? I can't find any info on them on the Shimano
    website. Does anyone know how much smaller these levers are? I'm trying to make shifting and braking
    easier for my short fingered wife. She is using Tiagra shifters now, and the LBS has installed a
    small rubber block that brings the levers in closer to the bar by taking up some of the brake throw,
    but the shifting throw still seems a bit long for her. Any other ideas?

  2. Scott Gates inquired:

    Quoted message said:

    Does Shimano still make Ultegra short reach STI Levers? I can't find any info on them on the
    Shimano website. Does anyone know how much smaller these levers are? I'm trying to make shifting
    and braking easier for my short fingered wife. She is using Tiagra shifters now, and the LBS has
    installed a small rubber block that brings the levers in closer to the bar by taking up some of
    the brake throw,

    That's basically how the ST-R600 brfters work.

    sheldonbrown.comderailers.html

    Quoted message said:

    but the shifting throw still seems a bit long for her.

    I don't think there's any difference in shifting throw, just brake reach.

    Quoted message said:

    Any other ideas?

    Angle the brifters a bit outward from one another.

    Make sure the handlebar tape isn't too thick at the back of the bar...sometimes folks use too much
    tape there, wrapping round in a figure 8.

    There's also a Terry handlebar with a notch just below where the brifters attach, to make more room
    for the thumb web.

    Sheldon "Ergonomics" Brown +--------------------------------------------------------------+
    | If you don't like yourself, you _can't_ like other people | --Robert A. Heinlein |
    +--------------------------------------------------------------+ Harris Cyclery, West Newton,
    Massachusetts Phone 617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.com Hard-to-find parts
    shipped Worldwide captainbike.comcaptainbike.com sheldonbrown.comsheldonbrown.com

  3. Thank you Sheldon. I turned the brifters out some, we will see how that works. I know you have been
    kidding around some about bar tape this week, but I think you may be on to something there. She has
    31.8 mm bars and the "Specialized Bar Phat" which may be too much of a handful for her. I'll look
    into the Terry bars. Thanks again. - Scott "Sheldon Brown" <[email hidden]> wrote in
    message "]news:[email hidden]...

    Quoted message said:

    Scott Gates inquired:

    Quoted message said:

    Does Shimano still make Ultegra short reach STI Levers? I can't find any info on them on the
    Shimano website. Does anyone know how much smaller


    these

    Quoted message said:
    Quoted message said:

    levers are? I'm trying to make shifting and braking easier for my short fingered wife. She is
    using Tiagra shifters now, and the LBS has


    installed a

    Quoted message said:
    Quoted message said:

    small rubber block that brings the levers in closer to the bar by taking


    up

    Quoted message said:
    Quoted message said:

    some of the brake throw,

    That's basically how the ST-R600 brfters work.

    sheldonbrown.comderailers.html

    Quoted message said:

    but the shifting throw still seems a bit long for her.

    I don't think there's any difference in shifting throw, just brake reach.

    Quoted message said:

    Any other ideas?

    Angle the brifters a bit outward from one another.

    Make sure the handlebar tape isn't too thick at the back of the bar...sometimes folks use too much
    tape there, wrapping round in a figure


    8.

    Quoted message said:


    There's also a Terry handlebar with a notch just below where the brifters attach, to make more
    room for the thumb web.

    Sheldon "Ergonomics" Brown +--------------------------------------------------------------+
    | If you don't like yourself, you _can't_ like other people | --Robert A. Heinlein |
    +--------------------------------------------------------------+ Harris Cyclery, West Newton,
    Massachusetts Phone 617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.com Hard-to-find parts
    shipped Worldwide captainbike.comcaptainbike.com sheldonbrown.comsheldonbrown.com

  4. "Scott Gates" <[email hidden]> wrote in message news:<lznSa.89495$GL4.25329@rwcrnsc53>...

    Quoted message said:
    Quoted message said:

    I'm trying to make shifting and braking easier for my short


    fingered wife.<<

    Hi, how about a different style of use. I have small hands and what I do is ride on the hoods. I
    have my thumb on the top of the hood, leaving one or more fingers to brake and shift. By the way,
    I'm using the Tiagra Brifters, on a LeMond Tourmalet. [Note to Sheldon, headset keeps loosening up
    on my French bike, so I took advantage of a closeout sale. I got over 30% off on an '02.] Life is
    Good! Jeff "Two Bikes" Starr

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.