Ultegra STI shifter cap removal

Discussion in 'Cycling Equipment' started by Glenn Butzlaff, Apr 12, 2003.

Thread Status:
Not open for further replies.
  1. Is it possible to remove the plastic cap on an Ultegra STI right lever (current 9 speed) without
    destroying it? Any info appreciated.

    Glenn Butzlaff
     
    Tags:


  2. Shawn Jelley

    Shawn Jelley Guest

    if they are identical to mine, try this:

    1. pull back on the lever until you expose the part usually under the hood.
    2. this should expose a tiny screw which, providing you have the right size phillips (its a tiny
    one), you can unscrew and remove the cap.

    just be careful, those caps are flimsy as anything, which is probably why they blow off when you hit
    the ground hard enough. i've done it once :)

    hope this helps. and if you need to replace them, your local shop should be able to order them, i am
    unaware of any other way to get 'em.
     
Loading...
Thread Status:
Not open for further replies.
Loading...