Using track wheel on road fixed gear

[Maxfield D]

I'm tempted by a pair of track wheels (front 100mm, back 120mm). I would be using these on my Ciocc
1980-something fixed-gear road bike. Would I need to get a longer axle for the rear wheel? How would
I deal with the spacing issue? Is it easy?

Thanks,

David Maxfield Mitchell, SD

 

[Sheldon Brown]

Maxfield D wrote:
> I'm tempted by a pair of track wheels (front 100mm, back 120mm). I woul=
d be
> using these on my Ciocc 1980-something fixed-gear road bike. Would I ne=
ed to
> get a longer axle for the rear wheel? How would I deal with the spacing=
issue?

Depends on the hubs. Many track hubs have axles long enough to be=20 spaced out farther. Your
Ci=F6cc is prob'ly 126 mm spacing (measure it t= o=20 be sure.) If so, a simple 3 mm spacer on each
side oughta do it.

Spacers should be installed between the locknuts and the cones.

If you need to replace the axle, you might want to consider converting=20 to quick release, which is
a nice feature on a road bike.

See also http://sheldonbrown.com/fixed for lots of info on fixed-gears=20 for road use.

Sheldon "1" Brown +-------------------------------------------------------+
| Military conscription is the worst form of slavery. | A more enlightened age will consider it a
| War crime. |
+-------------------------------------------------------+ Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041 http://harriscyclery.com Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

 

[Qui Si Parla Ca]

max-<< I'm tempted by a pair of track wheels (front 100mm, back 120mm). I would be using these on my
Ciocc 1980-something fixed-gear road bike. Would I need to get a longer axle for the rear wheel?

Sounds familiar!!

I have this very setup-

You may be able to add 3mm of spacers to the track hub on each side(which is what I did-Suzue pro
track hubs) or cold set the frameset to 120mm...


Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 http://www.vecchios.com "Ruote convenzionali costruite eccezionalmente bene"