stephen pridgeon wrote:
> "M Series" <
[email protected]> wrote in message news:<
[email protected]>...
>> stephen pridgeon wrote:
>>> I've managed to strip the pedal thread on my crank, so I'm in need of a new one.
>>>
>>> It must have a square taper.
>>>
>>> If anyone has one lying around, near to West London, which they don't need anymore, I'd
>>> appreciate a line.
>>>
>>> Many thanks, steveP
>>
>> Just checked, I have an old 105 crankset with 170mm cranks. It has blue biopace rings. The cranks
>> are usual silver colour and have quite a lot of white surface marks caused by salt corrosion. I
>> am sure they are just superficial. If you are interested I can take a picture and you can have
>> them for twice of whatever it will cost to send them to you I can remove the rings if you don't
>> want them.
>>
>> I also have a spare 170mm Ofmega LH crank in perfect condition and a old Deore chainset, again
>> 170mm with triple biopace rings, the rings are worn but the cranks are servicable.
>
> Thanks for the kind offer, but I'm really after 172.5 cranks. Many thanks again - your generousity
> is fantastic.
>
> Regards SteveP
No problem Steve, send me your details by email Bob and let me know which bits you want.
--
The Reply & From email addresses are checked rarely.