wanted - 20" heavy duty wheels.

Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1"😉 tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.

clare at snyder.on.ca said:

I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account fromhttp://www.teranews.com

email hidden said:

Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1"😉 tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.

Where are they, and what do you want for them? 20" is more to my
liking, and wider than 1" tires, but perhaps they could be used.

Quoted message said:

clare at snyder.on.ca said:

I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account fromhttp://www.teranews.com

--
Posted via a free Usenet account from http://www.teranews.com

$300 for the four wheels and six tires & tubes.Plus actual shipping. I
am located in SW Florida.
The hubs were custom made by Phil Wood.

clare at snyder.on.ca said:

On 27 Jan 2007 13:23:39 -0800, "[email hidden]"

Quoted message said:

Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1"😉 tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.Where are they, and what do you want for them? 20" is more to my

liking, and wider than 1" tires, but perhaps they could be used.

Quoted message said:

clare at snyder.on.ca said:

I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Quoted message said:

Quoted message said:

Waterloo Ontario.

Quoted message said:

Quoted message said:

--
Posted via a free Usenet account fromhttp://www.teranews.com--

Posted via a free Usenet account fromhttp://www.teranews.com