Whats wrong when

Quoted post said:

Originally posted by zaskar
I push my bike the cranks want to turn? my Ksyrium SSL SC have over 5k miles on them and i have DuraAce drive train. would the cogs/freewhell assembly cause this? or the wheel, thanks.

Its the freehub. Take the rear wheel off and spin the cassette. You should find that it doesn't want to spin freely. I'm not sure how you service a SSL freehub, but since I have one too let me know what you find out. I'll go searching and see if I can find anything also.

See this previous thread. You may not need to tear it appart depending on how bad it is. you could try just getting some grease into it.

http://www.cyclingforums.com/t92610.html

Quoted post said:

Originally posted by davidbod
Its the freehub. Take the rear wheel off and spin the cassette. You should find that it doesn't want to spin freely. I'm not sure how you service a SSL freehub, but since I have one too let me know what you find out. I'll go searching and see if I can find anything also.

No it doesnt spin to free when i removed the wheel, will this affect the performance of the wheel ? if i spin the wheel it doesnt spin as long as my front wheel. thanks for the link but im just gonna take the bike in to a shop that knows these wheels, rest of bike needs attention also its only been to shop once in 5,500 miles ill post what they find.