Cycling Equipment · Public discussion

Wheel size - VDO computer

Started by Peter_49 · · Last activity · 3 posts · 4,158 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
20 October 2004
Last activity
20 October 2004
Original author
Peter_49
Posts
3
Discussion status
Public discussion
Total views
4,158
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. Hi,

    I have two bikes one a road bike with a 700x23c wheel and a MTB with a 26x2.1 wheel. I was surprized to see in the manual of "VDO Cytec C08 computer" the same wheel size 2133 mm (84.0"😉.

    The wheel size indicated for the MTB in the manual is actualy 26x2.125 (mine is 2.1).

    I have couple of questions:

    What is the meening of the numbers 700x23c and 26x2.1?
    How come two different wheel sizes has the same 2133mm circumference? Or is it a mistake in the manual?

    Is there any other way to calculate the wheel side, not using the ruler taking into account the data the manufacturer of the tire gives?

    Than you

    Peter

  2. Dear Peter: Sheldon has done a masterful job of answering this question at:
    http://www.sheldonbrown.com/cyclecomputer_calibration.html

    Dave Reckoning

    "Peter_49" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    Hi,

    I have two bikes one a road bike with a 700x23c wheel and a MTB with a
    26x2.1 wheel. I was surprized to see in the manual of "VDO Cytec C08
    computer" the same wheel size 2133 mm (84.0"😉.

    The wheel size indicated for the MTB in the manual is actualy 26x2.125
    (mine is 2.1).

    I have couple of questions:

    What is the meening of the numbers 700x23c and 26x2.1?
    How come two different wheel sizes has the same 2133mm circumference?
    Or is it a mistake in the manual?

    Is there any other way to calculate the wheel side, not using the ruler
    taking into account the data the manufacturer of the tire gives?

    Than you

    Peter

    --
    Peter_49

  3. Peter_49 said:

    I have couple of questions:

    Quoted message said:

    What is the meening of the numbers 700x23c and 26x2.1?
    How come two different wheel sizes has the same 2133mm circumference?
    Or is it a mistake in the manual?

    It's not a mistake. "700x23c" is the most common tyre size for road bikes,
    which is actually a 23-millimeter tyre on a 622-millimeter rim. "26x2.1"
    is a common size for mountain bikes which use 26-inch wheels - 2.1 is
    the width of the tyre in inches. The rim is actually 559 millimeters in
    diameter and the tyre about 53 millimeters.

    So what you have is a big wheel with a skinny tyre and a smaller
    wheel with a fat tyre, and the total circumference is indeed almost the
    same.

    However, the actual value for the 700x23c tyre in the VDO manual isn't
    very accurate. A 23-millimeter tyre for a road bike is almost never 2133
    millimeters in circumference, but usually somewhere between 2090 and
    2100 millimeters.

    -as

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.