Where can I buy really big Chainrings

[sm9ai]

I all,

I'm after a really big Chainring 62t or bigger - preferably 65t. However I can't seem to find any anywhere.

And ideas?

 

[nun]

I all,

I'm after a really big Chainring 62t or bigger - preferably 65t. However I can't seem to find any anywhere.

And ideas?

Try

http://sheldonbrown.com/harris/chainrings/110.html

They have a 65t Schlumpf too. Call they are very helpful

 

[sm9ai]

Thanks, but forgot to mention - preferably based in the UK

 

[nun]

Thanks, but forgot to mention - preferably based in the UK

Try any place that sells mountain bikes or TA components. If you go to a good LBS they should be able to fix you up. Also here's a 61t from a UK source

http://www.camza.biz/item--TA-Vento-Outer-Chainring-PCD135-Campag-57-61-T--21CRTAVARTAEF

 

[mark higgins]

Mdt do the Luna chainring in big sizes. You can get their number in cycling weekly. I think the address is www.mdt-products.co.uk. They do them as big as you need, I think up to 110 teeth.

 

[nun]

Mdt do the Luna chainring in big sizes. You can get their number in cycling weekly. I think the address is www.mdt-products.co.uk. They do them as big as you need, I think up to 110 teeth.

Is that the Chris Boardman ring? That's insane.

 

[sm9ai]

Thanks for the replys.

I'm getting there. I already have a 60 so 61 not enough of a jump and www.mdt-products.co.uk is a bit more than I wanted to pay.

Anyone know if there is anything in the middle. Preferably around the £50 mark.

 

[mark higgins]

I doubt you'll get anything cheaper as there isn't much call for rings that size. Why the need for such a big chainring? I think as stated earlier that TA used to do them, but it was for one of their spiderless crank sets.