D
Dan H.
Guest
I need a 1" quill type stem with a 90mm extension that comes off the quill
at 90 or +10 degrees. That is to say the extension should be perpendicular
or slighty angled upward from the quill. Clamp diameter should be 1"
[25.4mm] but 26.0mm is O.K. with a shim.
Stems that angle downward from the quill need not apply.
A picture would be nice.
Thanks, Dan.
brm at politesociety dot com
at 90 or +10 degrees. That is to say the extension should be perpendicular
or slighty angled upward from the quill. Clamp diameter should be 1"
[25.4mm] but 26.0mm is O.K. with a shim.
Stems that angle downward from the quill need not apply.
A picture would be nice.
Thanks, Dan.
brm at politesociety dot com