XTR '97 ST-M910

"tpi" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hallo, I got an offer to buy new Shimano ST-M910 shift/brake levers. Is it possible to use them
with v-brakes? I heard that they are designed for canti&v-brakes but all the info I foud

in

Quoted message said:

the net tells about canti only? Help, please. I can get them for $50 - not bad for XTR.
Regards,Marek

They can be used with V-brakes, but unless you've had a lot of practice braking gently, I wouldn't
recommend it. I had a pair of XT canti shifter/brake levers that I rode successfully for several
months with V-brakes, but the levers were really "mushy," and definitely required a very soft touch
when braking. Squeeze too hard, and very bad things happened very quickly! Before I sent the bike
with those levers to my little brother who is a novice rider, I replaced the levers with V-brake
compatible ones.

Optimally, I'd look for another pair of levers that are V-brake compatible before you bought this
set. You can run a travel agent, or similar setup. Last time I saw travel agents, they were running
$20 per, so there's your savings gone.

Mike