hey fellow bike lovers (or haters seeing as this is a teck forum),
i have a zipper fairing with cracks radiating from the attachment holes. years ago i tried rubber cement, which obviously didn't work. anybody know what product (glue and patch i assume)i need and where to get it? i have searched like crazy to find this info and it seems the question has not been raised, so this would be a good one to get in writing for others not as determined to register as i was (ive been at this for two hours.) thanks -ratty😕
Cycling Equipment · Public discussion
zipper fairing repair
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 27 July 2005
- Last activity
- 8 February 2006
- Original author
- rattyroo
- Posts
- 4
- Discussion status
- Public discussion
- Total views
- 1,714
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
First, make some reinforcement rings from thin polycarbonate sheet. They should be flat disks about three times the diameter of the bolt hole. These are going to be laminated onto the fairing at the holes. You'll want to use a urethane based glue as it has the best adhesion to polycarbonate.
-
thanks for the info.
for any others out there who need info on this stuff if found a great solution. go to urethanesupply.com and get their plastifix kit. the smal one goes a long way. this stuff is great. and when you do get it go to the hardware store and get some fiberglass fabric and use that with the kit (the kit explains how) cuz i tried to use just the plastifix kit and it wasnt strong enough.
-ratty -
rattyroo said:
thanks for the info.
for any others out there who need info on this stuff if found a great solution. go to urethanesupply.com and get their plastifix kit. the smal one goes a long way. this stuff is great. and when you do get it go to the hardware store and get some fiberglass fabric and use that with the kit (the kit explains how) cuz i tried to use just the plastifix kit and it wasnt strong enough.
-ratty
Why don't you contact Zip and see what their replacement deal is? I used one in the early 80s and liked it but sure got teased by other riders. It could also act as a spinaker with a tail wind.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.