1) Shimano Dura Ace 7700 ("9 speed"😉 front hub, 12h, and a 12h Campagnolo
Shamal 12 tubular rim (700c). Got these as a project, never went ahead and
put it together. Rim is used, with a slight bump on the rim that's
noticeable while braking, but not while riding. Looks great otherwise. Hub
has been laced but never ridden.
Make offers, I'm willing to split the parts up.
2) Shimano 105 (FH-1056) 32 hole hub, laced to a Mavic MA-2 rim (green
label).
14-15-14 DT spokes on the right, Wheelsmith 14-17-14 (they were what I had)
on the left. Decent mechanical condition, although eyelets show some
corrosion. No skewer. Make me a reasonable offer.
3) Also have a Campagnolo "Sirrocco 20" rear clincher. Athena level hub with
8sp cassette body (you can get spacers to run 9s on this, and I've got a
load of 8s cogs), 20 bladed spokes, 34mm deep Atlanta rim. Heavy but
moderately aero. The hub needs some bearing work.
4) Mavic MA-40 clincher rim laced with 32 wheelsmith oval spokes (15g) to a
Sachs New Success hub. Hub has some tarnish from years in my basement, but
functionally it's perfect. Rim has brake track wear and a few nicks from
travel (cosmetically it's a 4 out of 10) but round, true, and lots of life
left.
Make any reasonable offer, I'm moving and these are wheels that have sat in
my basement for years. Too nice to throw out, but I have no use for them.
Also Sugino AC130 crankarms, 2 pair of unused arms (no rings/bolts/BB),
175mm.
130BCD, double, these take square taper (~109 - 112) BB. Have been in parts
box for a couple years.
A pair of ITM bullhorn bars. 25.8 clamp area, 40cm c-c width, drilled for
internal cables. Lots of scuffs & scrapes, brownish anodized color.
A set of Time ATAC composite pedals. The cover plate on one side of one of
the pedals has a small chunk taken out of it, still completely functional,
but probably best used for good condition riding (city bike? commuter?).
I have, or can take, pictures of most of this stuff. No reasonable offer
refused.