anyone know of a kickstand that works with a burley bent?

Steve Knight said:

their kickstand mount requires you to remove the quick release to get the wheel
off it would be nice to not have to do this. plus it is a bit in the way with
the trailer adaptor.

You get use to taking the whole wheel apart to change the tire

Quoted message said:

You get use to taking the whole wheel apart to change the tire

you might be right there. I found removing the chain made it far easier to get
the wheel back on. so the quick release may get in the way too.

--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.

Steve Knight said:

their kickstand mount requires you to remove the quick release to get the wheel
off it would be nice to not have to do this. plus it is a bit in the way with
the trailer adaptor.

I've never found removing the quick release to be much of a problem, but I
have not tried a trailer adapter.

Catuion, the Burley KS adapter is a bit of junk, it will work-harden in the
bend and fail after not too many months. Get one from Hostle Shoppe, although
it costs nX more, where X is considerably less than Infinity, it lasts lots
longer and is much better constructed, not a piece of sheet metal.

Quoted message said:

Catuion, the Burley KS adapter is a bit of junk, it will work-harden in the
bend and fail after not too many months. Get one from Hostle Shoppe, although
it costs nX more, where X is considerably less than Infinity, it lasts lots
longer and is much better constructed, not a piece of sheet metal.

I have come to the same conclusion. it is pretty flimsy for 16.00 hell I could
have made one with a vise and a hammer and my drill press. maybe I will. get a
fellow to weld a triangle piece onto it for me.

--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.

Quoted message said:

Catuion, the Burley KS adapter is a bit of junk, it will work-harden in the
bend and fail after not too many months. Get one from Hostle Shoppe, although
it costs nX more, where X is considerably less than Infinity, it lasts lots
longer and is much better constructed, not a piece of sheet metal.

I had a friend weld a bar between the top and bottom of the bracket. that will
take care of the crappy build. hell the paint had all come off and I only had it
a month.
took care of the bike moving on the stand.

--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.