I am aware that 32h goes with 3x. What about 28h high flange hubs with semi aero 700c rims? From a pic of a 3x laced 28h wheel it looks like there is no overlapping of spoke head over the next spoke at the hub. I am concerned about the angle at which the spoke exits the rim though. I did some basic trigonometry calculation, and this angle comes out to be a little over 6 degrees (from perpendicular).
Cycling Equipment · Public discussion
2x or 3x? 28h paul high flange hubs to semi aero rim
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 15 February 2005
- Last activity
- 16 February 2005
- Original author
- commander_taco
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 1,196
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
commander_taco said:
I am aware that 32h goes with 3x. What about 28h high flange hubs with semi aero 700c rims? From a pic of a 3x laced 28h wheel it looks like there is no overlapping of spoke head over the next spoke at the hub. I am concerned about the angle at which the spoke exits the rim though. I did some basic trigonometry calculation, and this angle comes out to be a little over 6 degrees (from perpendicular).
I suggest 2X with 28H, especially with higher flanged hub.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.