Koxx-1 spoke lenght

You need 170mm spokes 🙂

Jc

--
jcb-21
------------------------------------------------------------------------
jcb-21's Profile: http://www.unicyclist.com/profile/12899
View this thread: http://www.unicyclist.com/thread/53800

now that's settled, can someone help me out?

what length spokes do i need for a koxx isis hub to a VIZ 19" rim

cheers

--
iridemymuni

munipsycho said:

Just a bit of advice: never vomit while wearing a full-face helmet.

guess what !

'Bike Coalition!!' (www.bikecoalition.com)
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/53800

are the try-all rims not 19"?

I think just about all trials rims are 19"..

--
burjzyntski

It's no good being Polish unless you prove it once a day.

\"every silver lining has a touch of gray.\"

"In summary: You want to make sure your Koxx is hard enough before you
start drilling."
------------------------------------------------------------------------
burjzyntski's Profile: http://www.unicyclist.com/profile/10188
View this thread: http://www.unicyclist.com/thread/53800

jcb thanks for the WRONG info.. I e-mail division 8, they use 164 mm

--
maxisback

Hey ur mom is my signature
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/53800

burjzyntski said:

are the try-all rims not 19"?

I think just about all trials rims are 19"..

That doesn't mean anything about the spoke lenght though. It varys
slightly from rim to rim...

--
forrestunifreak

If I had a signature, it would look something like this.
*'My gallery-NAUCC 2006!'
(http://tinyurl.com/bbf9x)*
BANANA'S FOR JESUS!
_____________________________________________
-last edited by skrobo : today at 11:41 am.-
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/53800

maxisback said:

jcb thanks for the WRONG info.. I e-mail division 8, they use 164 mm

E mail Koxx One directly, and you'll see that they use 170mm spokes. I
think that they are the best placed to answer you.

Jc

--
jcb-21
------------------------------------------------------------------------
jcb-21's Profile: http://www.unicyclist.com/profile/12899
View this thread: http://www.unicyclist.com/thread/53800

I have built a few and generally use 171 which seams to work ok. I
would guess anything between 170 and 172 would work.

Roger

--
rogeratunicycledotcom

++++++++++++++++++
Unicycle.com in the UK
The UK's Unicycle Source
www.unicycle.uk.com
+++++++++++++++++++
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/53800

you sure ? bacuse division 8 says that on the stock k-1's it's 164..

--
maxisback

Hey ur mom is my signature
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/53800

Mayhaps division 8 uses a smaller number of crosses?

--
ntappin

'how to build a strong comfy saddle from junk.'
(http://tinyurl.com/hxcb3)
------------------------------------------------------------------------
ntappin's Profile: http://www.unicyclist.com/profile/10800
View this thread: http://www.unicyclist.com/thread/53800

http://www.unicycle.uk.com/SpokeCalc.asp

You can always do the calc yourself?

Roger

--
rogeratunicycledotcom

++++++++++++++++++
Unicycle.com in the UK
The UK's Unicycle Source
www.unicycle.uk.com
+++++++++++++++++++
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/53800

Isn't a 36 hole only ever going to be a 3 cross. i am not sure that you
could lace it any different.

Call me stupid, but I had a 20" rim that I had a hub with the same size
flanges on it as the K-1 hub and I never bothered to measure the spokes
at all, just took the rim off the old hub and laced it to the K-1
hubsky. Worked like a charm!. I think I will go measure those spokes
for you and see.

--
Beener

I got your "G" right here!!!!!
------------------------------------------------------------------------
Beener's Profile: http://www.unicyclist.com/profile/3817
View this thread: http://www.unicyclist.com/thread/53800

Sorry, stupid reply. I have a double walled 20" try-alls are 19".

Apparently you could call me stupid!!!

--
Beener

I got your "G" right here!!!!!
------------------------------------------------------------------------
Beener's Profile: http://www.unicyclist.com/profile/3817
View this thread: http://www.unicyclist.com/thread/53800

your stupid

:p

any help with the koxx isis hub and VIZ 19" rim?

--
iridemymuni

munipsycho said:

Just a bit of advice: never vomit while wearing a full-face helmet.

irvinegr said:

haha i just thaught it was funny the title is "3th movie"

'Bike Coalition!!' (www.bikecoalition.com)
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/53800

its nearly the same

171 - 172 will work

--
Smilymarco

'Alptraum' (http://www.alptraum.net) | 'Municycle.com'
(http://www.municycle.com)
------------------------------------------------------------------------
Smilymarco's Profile: http://www.unicyclist.com/profile/4110
View this thread: http://www.unicyclist.com/thread/53800

sweet

should i get black or silver spokes?

i think black

--
iridemymuni

munipsycho said:

Just a bit of advice: never vomit while wearing a full-face helmet.

irvinegr said:

haha i just thaught it was funny the title is "3th movie"

'Bike Coalition!!' (www.bikecoalition.com)
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/53800

its your choice 😄

i use silver spokes at my wheelset... cause my VIZ-rim is silver and my
hub too

http://tinyurl.com/rkpxn

i love my trials 🙂

--
Smilymarco

'Alptraum' (http://www.alptraum.net) | 'Municycle.com'
(http://www.municycle.com)
------------------------------------------------------------------------
Smilymarco's Profile: http://www.unicyclist.com/profile/4110
View this thread: http://www.unicyclist.com/thread/53800

sweeeet

ive got a kh frame and blue pedals, what colour rim?

--
iridemymuni

munipsycho said:

Just a bit of advice: never vomit while wearing a full-face helmet.

irvinegr said:

haha i just thaught it was funny the title is "3th movie"

'Bike Coalition!!' (www.bikecoalition.com)
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/53800

rodger, the k1 hub isnt on the table.. or maye im rlly blind

--
maxisback

Hey ur mom is my signature
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/53800

iridemymuni said:

sweeeet

ive got a kh frame and blue pedals, what colour rim?

its all your choice 😉
i would take blue

--
Smilymarco

'Alptraum' (http://www.alptraum.net) | 'Municycle.com'
(http://www.municycle.com)
------------------------------------------------------------------------
Smilymarco's Profile: http://www.unicyclist.com/profile/4110
View this thread: http://www.unicyclist.com/thread/53800