Make sure the right is on the right and the left is on the left. Your
right-hand pedal should be threaded normally -- righty-tighty,
lefty-loosie. The left pedal is threaded the opposite way. Make sure
each is on the right side, and the pedals are screwed in good and
tight. Not too tight on the damaged side though, they may strip!
If you can't keep the pedals tight after the damage, you may need to
get the holes re-tapped, or worst-case get a new crank on that side.
--
johnfoss
John Foss
"jfoss" at "unicycling.com" -- www.unicycling.com
-----------------------------------------------
"pretty much every trail that we've done on the California or Moab Muni
weekends is an XC trail." -- Kris Holm, on XC from a North Shore point
of view
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/56093