Cycling Equipment · Public discussion

Campy Mirage rear hubs

Started by Email address hidden · · Last activity · 5 posts · 937 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
18 April 2007
Last activity
18 April 2007
Original author
Email address hidden
Posts
5
Discussion status
Public discussion
Total views
937
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I have Campy Mirage rear hubs, 1999 model, on my road bike. About 15K
    miles on them, plus hundreds of hours on the indoor trainer. I
    believe these are sealed bearings. How can I tell if the bearings are
    still good?

    Thanks.

  2. <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have Campy Mirage rear hubs, 1999 model, on my road bike. About 15K
    miles on them, plus hundreds of hours on the indoor trainer. I
    believe these are sealed bearings. How can I tell if the bearings are
    still good?

    How do they feel? Spin the axle in the wheel with your fingers - lumpy,
    graunchy or smooth?

    The good thing is that if you have let them wear horribly, you can probably
    just replace them. (unlike say a knackered shimano LH cup...)

    cheers,
    clive

  3. Quoted post said:

    I have Campy Mirage rear hubs, 1999 model, on my road bike. About 15K
    miles on them, plus hundreds of hours on the indoor trainer. I
    believe these are sealed bearings. How can I tell if the bearings are
    still good?

    Take the wheel off, remove the QR, rotate the axle with your fingers.
    As long as it turns smoothly all the way, the bearings should be just
    fine.

  4. Quoted message said:

    I have Campy Mirage rear hubs, 1999 model, on my road bike. About 15K
    miles on them, plus hundreds of hours on the indoor trainer. I
    believe these are sealed bearings. How can I tell if the bearings are
    still good?

    I think you probably can take the hub apart and repack the bearings,
    although they're not "cup and cone" and not adjustable.

    But if it feels smooth and not wobbly I would leave it alone. I took a
    Veloce rear hub apart after 9K miles and it looked like new inside.

  5. Quoted message said:

    I have Campy Mirage rear hubs, 1999 model, on my road bike. About 15K
    miles on them, plus hundreds of hours on the indoor trainer. I
    believe these are sealed bearings. How can I tell if the bearings are
    still good?

    With any hub, take the opportunity whenever the wheel is out of the bike
    (changing tire, moving in a car, etc)to spin the axle ( axle only, not
    the skewer) in your fingertips.

    Any roughness or play will be easily observed before it's serious if you
    check frequently and it takes but a couple of seconds. A good habit fro
    any cyclist to develop.
    --
    Andrew Muzi
    www.yellowjersey.org
    Open every day since 1 April, 1971

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.