I just built up a wheel with the 3 leading, 3 trailing pattern. I wasn't sure how to do the weave, as in putting spokes over and under each other, because it seemed like I would get very acute angles. I ended up not doing it at all, but I haven't tensioned and trued the wheel yet, so it would be an easy task to do it if needed. What is the purpose of the "weave" in wheel builds, and should I worry about it with this wheel (obviously, it's a front wheel, and it has 36 spokes- I wouldn't try this on anything with less margin for strength)?
Originally posted by Whitfit I just built up a wheel with the 3 leading, 3 trailing pattern. I wasn't sure how to do the weave, as in putting spokes over and under each other, because it seemed like I would get very acute angles. I ended up not doing it at all, but I haven't tensioned and trued the wheel yet, so it would be an easy task to do it if needed. What is the purpose of the "weave" in wheel builds, and should I worry about it with this wheel (obviously, it's a front wheel, and it has 36 spokes- I wouldn't try this on anything with less margin for strength)?
. Toby, in Montreal
Weaving or crossing spokes improves durability. Elbows in spokes cross over elbows out spokes. Radial loading slackens the bottom spoke. Interlaced spokes take up each other's slack. Pedaling forces in the rear wheel and front wheel where disc brakes are involved, torque is transmitted via the spokes. Pulling spokes increase in tension and pushing spokes decrease in tension. The crossing points between pulling and pushing spokes helps mitigate the changes in tension. Fatique life is improved by lowering the changes in tesnion. Most spoke failures occur due to fatigue
What is the purpose of the "weave" in wheel builds, and should I worry about it with this wheel (obviously, it's a front wheel, and it has 36 spokes- I wouldn't try this on anything with less margin for strength)?
Just realized the confusion. I mean the three leading, three trailing pattern mentioned in one of the links on the bottom of that page which is not the standard 3x lacing. In the one in the link from Sheldon's page is woven together, it is not clear if this is necessary, and given the bending in this situation whether it is even desirable.
Just realized the confusion. I mean the three leading, three trailing pattern mentioned in one of the links on the bottom of that page which is not the standard 3x lacing. In the one in the link from Sheldon's page is woven together, it is not clear if this is necessary, and given the bending in this situation whether it is even desirable.
For 3-leading-3-trailing: weave not. I have a page about this pattern at qnet.comwheel.htmlOpen ↗
Why interlace in conventional patterns? To quote from Jobst's book (which I recommend reading cover to cover)-- "Interlaced spokes take up each other's slack during severe radial loading and reduce the chance of spokes becoming loose."
Just realized the confusion. I mean the three leading, three trailing pattern mentioned in one of the links on the bottom of that page which is not the standard 3x lacing. In the one in the link from Sheldon's page is woven together, it is not clear if this is necessary, and given the bending in this situation whether it is even desirable.
For 3-leading-3-trailing: weave not. I have a page about this pattern at qnet.comwheel.htmlOpen ↗
Why interlace in conventional patterns? To quote from Jobst's book (which I recommend reading cover to cover)-- "Interlaced spokes take up each other's slack during severe radial loading and reduce the chance of spokes becoming loose."
