get some chain,jockey,sprocket noise goin up slight incline in saddle at 29/39 ( 10s) - anybody have any thoughts - don't get it at 21/39 - is there too little tolerance between jockey,chain,& sprocket at the extreme 29/39 combo ? campy design flaw when they went to 10s cluster ? and now there's an 11s - Shimano has a screw I believe that allows you to back of the rear deraileur -not so with Campy !
any experience or thoughts appreciated !!!!!!!!
Cycling Equipment · Public discussion
Noise Under Load at 29/39 Campy
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 20 July 2010
- Last activity
- 21 July 2010
- Original author
- litespeedguy
- Posts
- 8
- Discussion status
- Public discussion
- Total views
- 675
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Check to see if the hanger on your frame complies with Campag's spec as shown on page 22 of this document.
http://www.campagnolo.com/repository/documenti/en/7225432%20-%20Rear%20derailleur%209-10s-03-08.pdf
-
what is meant by L= 24 "divide symbol" 28 mm ?
-
litespeedguy said:
get some chain,jockey,sprocket noise goin up slight incline in saddle at 29/39 ( 10s) - anybody have any thoughts ...
Does your rear derailleur have 11t or 10t pulley wheels? -
I know I need a medium size RD - it's Campy Chorus - how do I tell what I've got - would the pulley wheel tooth count tell me this ?
-
litespeedguy said:
I know I need a medium size RD - it's Campy Chorus - how do I tell what I've got - would the pulley wheel tooth count tell me this ?
A picture will speak volumes. -
litespeedguy said:
I know I need a medium size RD - it's Campy Chorus - how do I tell what I've got - would the pulley wheel tooth count tell me this ?
A short Campy cage is 55mm long(pulley center to pulley center), while a medium Campy RD cage is 72.5mm long (pulley center to pulley center).
-
alienator said:
A short Campy cage is 55mm long(pulley center to pulley center), while a medium Campy RD cage is 72.5mm long (pulley center to pulley center).
thanks for your time & quick response !!!
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.