hi guys/girls
im looking for advice on replacing the rear hub on a dura ace wheel.funds are tight so i wont be able to replace with same as old one.
any tips on what i could possibly use as a replacement with a budget of $100
Bike Cafe · Public discussion
replacing hubs
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Bike Cafe
- Published
- 8 February 2015
- Last activity
- 9 February 2015
- Original author
- dobbs9473
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 1,504
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
FWIW. Have you considered simply replacing the bearings OR even simpler, simply repacking the bearings?
[LIST] AND/OR, you could simply replace the Freehub body with another 8-/9-/10-speed Freehub body OR an 11-speed Freehub body. BTW. If you are just going with a 9-speed hub, then cannibalzing a NOS 105 hub for the bearings & Freehub body (see Sheldon Brown's website for assistance ... I have found that the hub needs to be (at least loosely) laced in order to remove a Shimano Freehub body from the hub) would probably be less expensive than buying the Freehub body from your LBS & you would have a new set of bearings.
Otherwise, I recommend you consider an Ultegra hub.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.