Bike Speedometer

It looks as though you haven't reset it between rides.

Time: the elapsed time of your current ride
Average: the average speed of your current ride
Distance: the distance of your current ride
Max speed: the maximum speed you reached on your current ride
Odometer: the cumulative distance of all your rides

The "current ride" functions will work properly if you reset your cycle computer after each ride. (The odometer won't reset, but the other things will.)

I'm not sure about the Mity 8, but on one of my old bikes I had a Cateye speedometer, and holding the button down (there was only one) for a few seconds blanks it out for a new ride.

The user manual for the Mity 8 is available here: http://www.cateye.com/manuals.php?products_id=100

Okay so does the distance make sense to you? I would think that it would say, 4 miles, 8 miles, etc..
Thank you for the reply to my post and for giving me that website. Do you have a speedometer also? How many miles are you riding in a day?

*monica

Quoted post said:

Originally posted by rek
It looks as though you haven't reset it between rides.

Time: the elapsed time of your current ride
Average: the average speed of your current ride
Distance: the distance of your current ride
Max speed: the maximum speed you reached on your current ride
Odometer: the cumulative distance of all your rides

The "current ride" functions will work properly if you reset your cycle computer after each ride. (The odometer won't reset, but the other things will.)

I'm not sure about the Mity 8, but on one of my old bikes I had a Cateye speedometer, and holding the button down (there was only one) for a few seconds blanks it out for a new ride.

The user manual for the Mity 8 is available here: http://www.cateye.com/manuals.php?products_id=100

Quoted post said:

Originally posted by HarMonica
Okay so does the distance make sense to you? I would think that it would say, 4 miles, 8 miles, etc..

It would make sense if you haven't been resetting it between rides -- as the computer thinks you've just been on one really big ride, it's saying the current ride is 79.89 miles, which corresponds with your odometer that's at 79.9.

If you reset it at the start of each ride, it'll zero out the current ride details, but leave the odometer intact -- so at the end you can get info about that current ride, and still have a count of how far you've ridden in total.

Quoted post said:

Do you have a speedometer also? How many miles are you riding in a day?

Yeah, I have a heart rate monitor/bike computer thing. I try to get in 150-200km (100-125mi) a week where I can. (I've been into cycling semi-seriously for a year and a half or so, by the way; when I was starting out, I was getting in 20-40km (12-25mi) a week.)

A Catey Mity 8 has a few more functions including being able to set multiple trips. Since you do not seem to know the operation of it, I suggest you log onto www.cateye.com and dowload the directions for it. It's a bit more complicated than I care to try to put into text in a post. I have a Mity 3 and three other bikes with cyclocomputers. All do similar things and take a bit of time to get used to using.

I am one of those irritating people that read the directions.

Reset for a two button cateye is done by pressing both buttons at the same time when in the average, distance or time display.

Quoted post said:

Originally posted by HarMonica
Okay so does the distance make sense to you? I would think that it would say, 4 miles, 8 miles, etc..
*monica

AFAIK the mity 8 is the different shaped and more expensive mity 3. It has two buttons right?

You have two modes, Auto (denoted by a tiny A on the screen) and manual. In Auto mode, the time, average speed and trip distance all start counting when you start and stop when you stop. In manual mode nothing counts (except the odometer) unless you press the big button on the right (the M or K for the units flashes when it is started). It all keeps counting until you press the same button again. It all depends whether you like a true average for the whole trip or just for when you were moving.

In either mode, all of the measurements are added up as if life was just one long bike ride, unless you reset by holding down both buttons for a couple of seconds. If you hold down the mode button (the left button) when you are in trip distance, you get trip 2 distance, which is reset independantly from the other measurements (you could keep a weekly total with this for example). Hold down again to get into odometer.

I have been very happy with mine (mity 3) and am tempted to but another one or two (while they are cheap, before they go out of stock) as the wire connections on the back of the computer mount are a bit iffy

best wishes
james

Thanks James. I have the exact one that you mentioned. It will just take me some time to get use to it and figure it out... Thanks for the insight. You've been very helpful.

*Monica

Quoted post said:

Originally posted by Insight Driver
A Catey Mity 8 has a few more functions including being able to set multiple trips. Since you do not seem to know the operation of it, I suggest you log onto www.cateye.com and dowload the directions for it. It's a bit more complicated than I care to try to put into text in a post. I have a Mity 3 and three other bikes with cyclocomputers. All do similar things and take a bit of time to get used to using.

I am one of those irritating people that read the directions.

Reset for a two button cateye is done by pressing both buttons at the same time when in the average, distance or time display.

I have a Cat Eye Mity 8 that came on a used bike I bought. Found the manual on-line. The manual says to switch on or off AT (Auto Mode) to press the button in the back while displaying Elapsed Time, Distance 1 or 2, or Average Speed. I have done this, nothing happens. Am I missing something here???

When in doubt, read the owners manual.
https://www.cateye.com/files/manual_dl/6/568/MT400v1E.pdf
This day and age pretty much all manuals are available online, which is great for a cheapo like me who buys a lot of things second hand.

HarMonica was last seen:
12y 17w ago

Just sayin'.

BikeBikeBikeBike said:

When in doubt, read the owners manual.
https://www.cateye.com/files/manual_dl/6/568/MT400v1E.pdf
This day and age pretty much all manuals are available online, which is great for a cheapo like me who buys a lot of things second hand.

Thanks, but if you had read my post carefully, I've been there, done that, I'd already gotten that very manual on-line (not my first rodeo downloading PDF manuals for all manner of stuff 🙂 ). Appreciate the attempt to help anyway. I have tried following the instruction-- which says to push the back button while in certain modes, but I do that and the "AT" never switches off. The AT mode does seem to suit my purposes but might be nice to see how the other way works, too. Maybe a hard re-set (removing the battery) might do the trick, but wonder if anyone had had the same issue and had some other less drastic fix. Or maybe mine is defective. (I could go back to my old Schwinn wireless computer, I like the bigger display, though not how it does not automatically turn on).

Open Mic Guy said:

Thanks, but if you had read my post carefully, I've been there, done that, I'd already gotten that very manual on-line (not my first rodeo downloading PDF manuals for all manner of stuff 🙂 ). Appreciate the attempt to help anyway. I have tried following the instruction-- which says to push the back button while in certain modes, but I do that and the "AT" never switches off. The AT mode does seem to suit my purposes but might be nice to see how the other way works, too. Maybe a hard re-set (removing the battery) might do the trick, but wonder if anyone had had the same issue and had some other less drastic fix. Or maybe mine is defective. (I could go back to my old Schwinn wireless computer, I like the bigger display, though not how it does not automatically turn on).

I have never heard anyone call a hard reset a drastic switch.
I thought what you said sounded like a malfunction too but I wanted to go to basics first.

mpre53 said:

HarMonica was last seen:
12y 17w ago

Just sayin'.

Lmao, good one. I guess he doesn't require an answer at this point.

Throughout my riding experience, I have never set a bike speedometer. Maybe it is because I am too old-school.